Milodon Road Race Pan - any surprises on installation?

Update....I had two surprises.
1: HV oil pump interferes with pan. I ground away approx. 1/8" from pump body edge in order to seat the pan.
2: After installing the engine this past weekend, I noticed there is zero clearance between pan and gusset of steering support box (part of k member). I took the engine back out and cut off what I felt was all I could cut off of the gusset before getting into a structural portion of the steering box support.
There is about 1/4~3/8 inch of clearance between the "kickout" portion of the pan and bottom side of the steering box support. I do have a mancini mag mount, which in theory allows no movement of the engine, but I have a sneaky suspicion she's gonna make contact when things get active.......it's definitely a tighter fit than I was led to believe, even with the "big" area of an ebody.