Cam card for Mopar Purple shaft 284 cam p4120653

70aarcuda said
As Rob says...find TDC to set your degree wheel...turn the engine over until max lift is recorded on dial indicator .....set dial indicator to zero....turn engine over ...read indicator at .050 before max lift and after max lift...add two number together..divide by two....you can double check by using .100 before and after max lift...

also I dont know if those opening and closing of the intake valve are correct at Victory.......
...i get 258 duration instead of the post 252 for the mopar 557 cam...and the 272 instead of 265 for the mopar 590 cam

One of the reasons I wanted to see the actual cam card, besides being wary of the cam itself, the box he got it in is mostly tape, and the part number has been blacked out. If I could find two sources of specs that matched, I would at least be able to be sure what I should be seeing. Being such an old cam, with so many different versions for different engines, in hydraulic and solid, and basically being identified as THE Purple Shaft 284 cam...well...it's probsbly my mistake, but I hate chasing my tail due to bad info.