FiTech EFI system

All,
My vent/return is installed and working great. I added a barb to the fuel filler neck right at the tank grommet and connected it to the old emission cannister hard line. I did do a check before connecting to the barb, and believe it or not the fuel from the FCC did make the journey up a few inches here and there and I caught it in a make shift catch can. Good thing that I did as the old hard line was pretty dirty and the fuel coming through was very brackish and when it cleared up I finished the install. I made the 40 mile round trip to the local Friday Cruise without any issues at all and now my FiTech is all set. Thanks to Johnny and Ken for the encouragement and motivation. Yeah Fuel System Done! Now on to changing springs and weights on the Skippy White HEI, (which I was able to squeeze in by the wiper motor) to bring in my timing sooner as it comes in at 3500. Also do some data logging to see wassup. One other detail is to add the correct stiffer 995-16 Comp Dual Valve springs as the car has a couple 100 miles on it now.

Also not sure on the exact MPG but it is looking very encouraging!

Thanks,
Marion