Another Eddy head question....

hey Fabo, in need of your help. I just ordered the 60779 Eddie heads for my 340. My question is, is the Howard's cam I have, too big for stock Eddies? Here are the cam specs:

Cam Style:Hydraulic flat tappet

Basic Operating RPM Range:2,600-6,200

Intake Duration at 050 inch Lift:230

Exhaust Duration at 050 inch Lift:236

Duration at 050 inch Lift:230 int./236 exh.

Advertised Intake Duration:277

Advertised Exhaust Duration:283

Advertised Duration:277 int./283 exh.

Intake Valve Lift with Factory Rocker Arm Ratio:0.531 in.

Exhaust Valve Lift with Factory Rocker Arm Ratio:0.547 in.

Valve Lift with Factory Rocker Arm Ratio:0.531 int./0.547 exh.

Lobe Separation (degrees):110

Computer-Controlled Compatible:No

Valve Springs Required:Yes

Camshaft Manufacturers Description:Lopey idle, strong midrange. Good throttle response, 2,400+ stall.

The 340 is .30 over forged Pistons, 273 adjustable rockers.

Thank you in advance!