Lunati Cam Noise

bobscuda67 said
I changed out my cam to a Lunati VooDoo 702 cam kit last winter and it seems to have a lot of valve train noise.
Its a 340 with magnum heads on it so the rockers are 1.6 ratio. And I'm using small block Chevy style Crane aluminum rockers with Comps guide plates. The intake valve's lift is .525 and the exhaust is around .510. I have adjusted the rockers a few times but there still noisy.
Is it something I should be looking into or is it considered normal and I need to get use to it?
I'm also using 10w30 Mobil 1 oil and have good pressure.
Click to expand...

Hate to be the bearer of bad news but you most likely wiped a lobe or two. I did it last year with one of these cams and it ran fine but was very noisy. I adjusted the valvetrain a few times to no avail. When it started idling weird I knew what it was. 2 wiped lobes. Oil pressure doesn't really tell you jack in most cases. I hope for your sake I'm wrong. J.Rob