crank wire color?

1973 dart swinger new ignition switch install... want to install a remote starter button hidden some where. what color is the cranking power lead to the relay from the ignition switch coming out of the steering column?, is it the blue or the brown? my schematic i am using off the internet is hard to tell....

Go by the name of the wire and the position in the connector. Look it up in the diagram back behind the diagrams. Start is S2-12Y

The brown is a misprint. The brown is the coil bypass circuit, but it actually comes off the switch from a separate contact. In other words it's actually a completely separate and isolated switch pole

You guys MUST learn to use service manuals. MUST.

67Dart273 said:

Go by the name of the wire and the position in the connector. Look it up in the diagram back behind the diagrams. Start is S2-12Y

The brown is a misprint. The brown is the coil bypass circuit, but it actually comes off the switch from a separate contact. In other words it's actually a completely separate and isolated switch pole

You guys MUST learn to use service manuals. MUST.

View attachment 1715084508

View attachment 1715084509

Click to expand...

I know how to use service manuals, didn't have one.... going off a wiring schematic I found on mopar site, but thank you for the info, didn't realize was the yellow wire, my relay is not shooting juice to ignition module on cranking, on in run position, wanted to possible do a rewire.. I now have a gm hei conversion, runs great once jumper wired to get started.