Long-off 340 build
OK so I've been away for a while, but during that time I refined a list of parts and stuff that I have in mind. NOTE: I best not be seeing 72Valiant4Door posting some crap about spending, just because he's too cheap
FIRST THING'S FIRST, I have a cam selection up for scrutiny
20-810-9 - Xtreme Energy™ Retro-Fit Hydraulic Roller Camshafts
I'm also seriously considering this, to get the intake, distributor, and decent efi all in one
Edelbrock 32530: Pro-Flo 3 EFI System Small Block Chrysler | JEGS
I know it's a spendy set but with a sequential injection system on a super victor intake I figure it's worth a shot. Since EFI needs hi pressure, I'm stuck between a total tank swap
Aeromotive 18344: Fuel Tank with 340 Stealth Fuel Pump 1970-76 Dart/Duster | JEGS or efi pressure sump
Edelbrock 36052: Replacement High Pressure EFI Sump Fuel Tank | JEGS
Transmission options are still the same, Tremec T56 or Passon 855 if it ever becomes available
Since I'm going with the electric fan route
Flex-a-lite 160: 16" Diameter Black Magic S-Blade Electric Fan Adjustable Thermostat | JEGS and I'll be powering other stuff like the efi system a stereo, I figured looking at a beefier alternator was in order. What kinda amperage should I be looking at?
Powermaster 8-47529: Upgrade Alternator Natural Finish | JEGS
Other stuff:
-Aluminum heads
Edelbrock 60775: Performer RPM Cylinder Head for Small Block Chrysler | JEGS
(I know I need the rocker shaft, rockers, lifters, & pushrods)
-8.75" suregrip with 3.23 or 3.55 gears
-Full disc brake set (only replacing front discs that are worn or shot)
Brainstorming Here:
-Front: 215/60R14 Radial TA on 14x7 Rallye wheels
-Rear: 225/60R15 Radial TA on 15x7 Rallye wheels