440 /super charger add on ?
iam not sure was told just next up from stock..after ckn carb linkage..seems to ldle at 1000ish @ in gear around 850-900. The whole setup come off of a running 440 that last ran at Christmas. I put this setup on my running 440.dyer told me to back it off a little..and set it to 26..My dual point distributor, I believe had 26 degrees mech Advance built into it. And I ran around 6-7 at the crank..fir a total of 33... If my thinking is correct all I would have to is set it to 0 with a timing light at 1900 RPM I believe that is When my distributor is at full advance so that would be 26 correct.
iam not sure was told just next up from stock..after ckn carb linkage..seems to ldle at 1000ish @ in gear around 850-900. The whole setup come off of a running 440 that last ran at Christmas. I put this setup on my running 440.dyer told me to back it off a little..and set it to 26..My dual point distributor, I believe had 26 degrees mech Advance built into it. And I ran around 6-7 at the crank..fir a total of 33... If my thinking is correct all I would have to is set it to 0 with a timing light at 1900 RPM I believe that is When my distributor is at full advance so that would be 26 correct.