SRT8CUDA Build
More defective parts!!!
1. I got a "new" 39 tooth speedo gear from Classic Industries, but found the hole in the end of the shaft is not anywhere near deep enough to allow insertion of the speedo cable:(:(:(. The hole was only 0.550" deep vs 1.030" on real Mopar speedo gears. GGRRRRRR
2. I also bought a "new OEM" speedo gear housing because mine was worn inside. I could not install it in my tranny!!!! After checking my original unit, I found the housing diameter was `0.006 larger on the new unit. Thankfully my local machinist was home to do a rush machining job. After skimming 0.006", it fit perfectly.
Unbelievable!!!!
More defective parts!!!
1. I got a "new" 39 tooth speedo gear from Classic Industries, but found the hole in the end of the shaft is not anywhere near deep enough to allow insertion of the speedo cable:(:(:(. The hole was only 0.550" deep vs 1.030" on real Mopar speedo gears. GGRRRRRR
2. I also bought a "new OEM" speedo gear housing because mine was worn inside. I could not install it in my tranny!!!! After checking my original unit, I found the housing diameter was `0.006 larger on the new unit. Thankfully my local machinist was home to do a rush machining job. After skimming 0.006", it fit perfectly.
Unbelievable!!!!