Starting a BB Duster project

AndyF said
Here is what I'm working on at the moment. Just got the main harness as well as most of the other parts for a complete Holley Dominator EFI setup. Dominator ECU is in the upper left, 4150 throttle body in lower right corner. I'll be running 8 coils, 4 of them are shown in upper right corner. Probably won't use the distributor since I have the trigger wheel and cam sync setup available now. This is a new harness from Holley with the plugs for the 8 coils built in. This harness also has an extra power feed and relay to support the coils as well as some other nice updates. Part number is 558-117 for those of you who might be interested in a Holley EFI system.

View attachment 1715088798

The dist. looks like mine , from FAST. Very short design = chevy, w/ mopar blade on the bottom. Mine wouldn't clear my raised port heads, and took a but load of clearancing on the pass side head. I wound up w/ about 1/16" clearance and had to clock the dist a certain way to get the chevycap hold downs to clear. ---Andy, what`s up w/ the drivers side tub, looks very diff. from the pass. side,which looks great.--Noticed the short oil filter, same here.