New Clutch.....Problems
I pulled the clutch back out yesterday and now I see where the problem is. It looks like when the pressure plate was assembled the plate was set too low for the disc thickness. This caused the plate to depart too much when assembled to the flywheel and way too low of finger height. I compared it to the clutch that I originally removed. There is about .092" or 3/32" difference.
I pulled the clutch back out yesterday and now I see where the problem is. It looks like when the pressure plate was assembled the plate was set too low for the disc thickness. This caused the plate to depart too much when assembled to the flywheel and way too low of finger height. I compared it to the clutch that I originally removed. There is about .092" or 3/32" difference.
