Project Riddler's Ride - 1976 Plymouth Duster

@retroron if you look close at my dash you'll see 2 vents in the center. With everything going on under the dash I didn't want to attempt to put vents on the outer edges. I'm going to run 2 down into the sides of a custom console.

I went with 300lb springs as that is what Big Oak used and it worked. My hood is super heavy with the scoop. Also I'm using the hole in the original arm from the coil spring. Which with such a short stroke (4") it'll need the extra power. The company suggested I through a tack weld onto the spherical balls.

Riddler