Toolman it is a 2899205 1968 340 manual cam ground by CamCraft in 1982 or so.
65val, it has 1991 truck/Jeep cylinder heads and about 10.7:1 compression with a stock carburetor, intake and exhaust manifolds. It has an electronic distributor. The last time I ran it, with F70-14 bias ply Goodyear tires and better mufflers, it was running 13.60s at 104 mph. The cylinder heads were done by my friend that worked in the cylinder head lab at Chrysler and he did a lot to pick up tons of low lift and midlife airflow. They really picked up the power from low to high rpm and I raised the shift point from what used to be around 5700 to 6000 to 6100 rpm. It isa fur speed with 3.55 gear.