360 swap into 65 Valiant ( Need source for oil pan and pickup)
I've always tried to get a little more capacity, if I plan to run it hard. I also like to keep ground clearance soooo...I take a Milodon pan (30940 for a 360) and modify it to fit. In short, chop off the front corners and notch one side of the back to clear the center link of the steering. Not the cheapest route but, gets me a 7.5 quart pan! I can get you some measurements on where to cut, if you'd like.
I've always tried to get a little more capacity, if I plan to run it hard. I also like to keep ground clearance soooo...I take a Milodon pan (30940 for a 360) and modify it to fit. In short, chop off the front corners and notch one side of the back to clear the center link of the steering. Not the cheapest route but, gets me a 7.5 quart pan! I can get you some measurements on where to cut, if you'd like.
