pro comp Edlebrock Victor cylinder heads
Don`t know about the bad link.
In my 68 fastback, there is NO room for " any '' blower motor, modified or not. About 1/2" clearance there. I went to a hotrod heater under the dash, just in case I got caught and needed defrosters. And you will spend a lot of time clearancing the pushrod holes. My heads were cnc machined and I still had to work the pushrod holes 3 times ! A good tip might be going w/ some hi strength 5/16" pushrods, they are out there . Those heads flow pretty darn good if cnc`d at standard port. Mine flow 352 @ .600 lift, but don`t go up much from there. Running a .628 lift solid roller. Streetcar. Now if I can get my new signal light problem fixed------------