Rings for KB pistons 4.080

Had a discouraging break-in this year, too much oil consumption and burning. Engine work done by a reputable machine shop, boring and hone completed properly. New seals were used from Comp spring kit (deflector type seals). Leak down was conducted and results were on average 6%-10%.

Looking into better rings for Keith Black KB243-040 Hypereutectic Flat Top pistons 4.080 bore require 5/64, 5/64, 3/16? The Seal Power ones just didn't break in well (1500 miles), too much oil consumption and burn.

I've heard that Total Seal rings are the better ones to use. This is not used for racing motor just street/strip. Any advise would be helpful?