completely rebuild front suspension?

ahh whoops, double post...

I'll fill this with another thought.

be sure to check your control arms closely, looks at the far end just past the strut rod hole make sure it doens't look bent. also check your strut rod mounting location in the kmember. sometimes they are caved in a bit from curb hits or something. i had this problem recently.

i welded a bolt through some .25" plate and used a huge stack of washers and a breaker bar to flatten the strut mount. after wards i used a plumb and string to drop marks from the rear of the torsion bar sockets and from the front ball joint bolt in the spindle. got both sides equal and decent caster numbers during alignment...