T-56 Transmission Install Thread

OK it's my turn to have some clutch related issues. I've read through the troubles @Map63Vette has had and also @72BBSwinger said to try. The shop bled the master and the TOB and it's still not releasing. I have a 0.500" spacer in there. I haven't tried much but the shop is suggesting to add more to the rod and see if it can be pushed in more.

I'm going to see about re-bleeding it all, then move to longer rod, then finally (hope I don't have to go here), removing the trans and checking it.

Riddler
Disconnect the master cylinder at the clutch pedal. Manually move the master cylinder rod in and out fully, this should help it bleed. I had to do this on my jeep. Clutch pedal didn't allow for a long enough stroke to get the air fully out of the system