Red Headed Stepchild-75 Swinger LSX Swap

Well the new oil pan will be here tomorrow. It is the all steel 7 qt pan from summit. it is in a rear sump orientation which I will then cut, flip and reweld into a center sump so I can clear the center link.
Summit Racing® Economy Oil Pans SUM-G3610B

I was also lucky enough to get a call from my cousin offering me a deal on a cam/spring/pushrod setup, and im thinking of getting at least the springs and pushrods from him. The springs are pac 1219 valve springs and allow for a max of .625 lift cam, and the pushrods are hardened stock length texas speed pushrods. He is selling me the springs and pushrods for $150.
1200 Series - LS Ovate Beehive spring that has increased loads, rates and frequencies for more aggressive cams. This remains a drop in spring for stock parts but will handle increased lifts. - PAC-1219 - PAC Racing Springs
Texas Speed & Performance 5/16" Chromoly Pushrods, 7.35-7.50" Length

Here is the cam he is offereing me with the springs for a total of $350 for all 3 things. which is not a bad deal at all. This cam definitely has the sounds covered, but idk if it packs enough performance for what I want to do.
Howards Cams Hydraulic Roller Camshafts 197715-10

Should hopefully have some oil pan pics tomorrow as well as some cut/test fitted pics. wish me luck.