Camshaft to Small???

Doosterfy said
You did not mention stall speed or gear ratio. You did say daily street motor and it needs good vacuum for the brakes. You also did not say if its zero decked or how far down the pistons are from the deck a TDC or what size chambers the heads have so I'll assume the block was not decked and you have heads with chambers somewhere between 80 and 88cc chambers. That means its low compression. A small cam is going to work good for this and the cam you showed is small. If it were mine I'd use the cam you have and you can always upgrade later if you want. Daily drivers without big cubic inches, decent compression, converter and gears combined with a big cam are not good combos.

All good points^^^ the stall speed is 2500,gear ratio is 4.10, deck height (I believe is untouched), head volume is at 80 cc minus ten thousands of an inch milled from the head deck for straightness. I am putting a Performer Rpm on it with a fitech mean street mounted on top. I am thinking of going with this cam... >>> see picture <<<

I do want to test my cat against my brothers 69 Nova 427 and not embarrass myself but that isn't my main concern.

Thanks, Grant
Should I even bother?