Project Riddler's Ride - 1976 Plymouth Duster

Oh what a week! I've been working on wiring and getting things to work correctly. My dash lights were driving me crazy and then I found the issue. I put the pins in the connector into an empty slot on my 15 pin connector. Whew....issue resolved. Then I went ahead and started to test each gauge. Of course I have to program a couple and will hopefully get that soon.

Today I decided to tackle the reverse lights and the T56 wiring. The reverse light just wouldn't work and when I jumped the switch to see if it was the switch, it'd blow a fuse. Traced all my wires, there good. I then cut each bulb socket off and tested. Of course the last socket I tried was the issue. The pin inside was laying flat and was touching the outer wall. Issue resolved, well except the switch is bad also.

Here's hoping the rest of the testing goes much smoother.

Still need to find a reasonable F connector for the windshield wiper lines too.

Riddler