Even tho the mopar cam is advertised at [email protected] it's actually [email protected]. I wanted to do some testing on the dyno with the mopar cam since I'm just really curious about how it compares. I had just finishing reading a article in Mopar Muscle/may 2013 in which they compared the old .590 to 7 other grinds from lunati/Howards/Hughes & Comp cams and the .590 held it's own. So i would just like to try it out myself. And if it does work decent then I can at least say I'm running a ancient tech purple shaft lol Oh and actually one of the cams they tested was a custom grind Howards 260/[email protected] .656/.662 lift and the .590 made a avg of 8Ft Lbs/TQ & 9 Hp more over a 3500-7000 Rpm range. With the Howards cam being stronger up to 4500 rpm and the Mopar cam being stronger above 4500 Rpm. With some points as high as 30 hp more
