rear housing

Here's what I have now. My wheels are 15x10 with 295/50R15 with 6.5 backspace.
And my slicks 28/10-15 are on 15x8 with 4.5 backspace. They fit under wheel well (street tires) with about 2.5" of clearance on inside and just about 3/4" on outside. More clearance with slicks on. I'm not thinking of spending lots of money here so Dana is out. If I can find a cheap ($50-100) truck or C body housing I would go that route, if not I could cut my A housing. My axles are moser which are new and have 4" of spline. When I talked to them earlier today they said I could cut 1.5" to 2" and probably still be good. Just keep them cool during the cutting. I didn't want to cut the A housing but I might because once I cut axles I would need another set for that housing anyway.
Also I have (2). 489 center sections. One has a 3:91 and the other has 4:56. That's another reason I didn't want to go with Dana.
Rod