Building a 408 with IndyBrocks
A bit of an update on this. The project is complete and turned out quite well.
'93 Magnum block (that was also machined for LA rocker oiling)
Bored/Decked 4.03" ICON 984's 10.5 comp
SCAT 4" 9000 crank/SCAT ICR 6123 rods
Indybrock heads in the OP
Edelbrock RPM port matched/minor plenum blend
Long distance customer so I used my carb,(Holley 750XP), igntion, (old Mopar electronic), dyno headers, Moroso waterpump electric, MT v-covers.
Tested with Esso 91 pump fuel.
Love those Lunati Voodoo cams, J.Rob
A bit of an update on this. The project is complete and turned out quite well.
'93 Magnum block (that was also machined for LA rocker oiling)
Bored/Decked 4.03" ICON 984's 10.5 comp
SCAT 4" 9000 crank/SCAT ICR 6123 rods
Indybrock heads in the OP
Edelbrock RPM port matched/minor plenum blend
Long distance customer so I used my carb,(Holley 750XP), igntion, (old Mopar electronic), dyno headers, Moroso waterpump electric, MT v-covers.
Tested with Esso 91 pump fuel.
Love those Lunati Voodoo cams, J.Rob
