360 build thread
Got the timing chain on and the cam degreed. First time doing this, with the timing marks on the sprockets at zero i got 102 centerline, retarded the crank sprocket 6 degrees and got roughly 108.5/109. Did two measurements one at .050 and .020 btdc/atdc on the cam for redundancy.
Got the timing chain on and the cam degreed. First time doing this, with the timing marks on the sprockets at zero i got 102 centerline, retarded the crank sprocket 6 degrees and got roughly 108.5/109. Did two measurements one at .050 and .020 btdc/atdc on the cam for redundancy.