67 Valiant Signet (2 door) Windshield glass fitment?

Be careful with this one... the typical parts available for a hard top don't fit the 2 door sedan. JustMOPAR has the seals for a hard top, but not the sedan.
The 1967 Valiant used a one year only windshield and rear window gasket, with a channel in it to accept a plated plastic "locking strip". There were no stainless windshield or rear glass trim moldings on the '67's. The windshield glass is the same for several years (67 and up) but only for 2 or 4 door sedans.
You can use a 1968 windshield and rear glass gaskets, but then you'll need the '68 stainless trim if you want to hide the mass of rubber.
There was a rumor that Layson's had some '67 bits... you might give them a call. Also, be careful with the '67 rear glass if you are re-using it, that piece of glass is ridiculously hard to find. (Again, a hard top glass will not fit)

Garry