WIRING NIGHTMARE
now that helped me lots. and will use what you sent me. thank you.
Heh. The link to my post was the wrong one (fixed it now). This is the one with the pictures.
International Full Size Jeep Association - View Single Post - Cold Temp/humidity sensitive Ignition
Its nice to find a place that has lots of wire in differentcolors they will sell by the foot. If you have no boating places, I'm not sure what other business might do that.
Depending on the type of damage you find, you may be able to keep much of it.
Hard, brittle, cracked insulation either replace the wire, or if its just a small section, remove terminal, slip some high temperature heat shrink tubing on that part.
Frayed wires at the terminals. May be able to just snip the terminal and replace.
But if the wire is all corroded or oxidized up when the insulation stripped - not good.
Dirty or slightly oxidized terminals - clean. With the terminals out of the connector housing this is pretty easy.
I thought I was going to find a ton of bad wires in the jeep, and it ended up being just a few - mostly at connections and places where the wiring got too much heat.