[WANTED] 360 stuff

-
Status
Not open for further replies.
texas360

texas360

Well-Known Member
Joined
Jan 30, 2016
Messages
387
Reaction score
90
Location
TEXAS
Rating - 100%
1   0   0
Contact seller
Looking for 360 std pistons, timing cover, valve cover, windage tray, harmonic balancer, 268 or bigger cam with at least 0.474 lift, valve springs to handle cam, aluminum intake
 
I’ve got a good 71 360 cast balancer. Pm me.

Jake
 
I have a timing cover, valve covers, harmonic balancer and rods. Can post pics tomorrow. Pm me and maybe we can work out a deal.
 
Looks like the balancer got sold with an engine. The extra timing cover I have is for a 273/318/340 not a 360. I do have 360 rods and valve covers. See pics. Rods light surface rust just due to sitting on a shelf in the box. I can throw in the fuel pump if you need it. Check your inbox for pricing and shipping.

F6649B7D-305E-4C46-9373-0B6CA286FF30.jpeg


A342C65E-50A9-4FA8-A94E-C2E30F0BFB2C.jpeg


5B420590-A662-4CFB-9E90-E2A70794DA3F.jpeg


9593DE1D-ADBE-445B-92B6-50B9964034BF.jpeg
 
I have two sets of flat top pistons for a 360, they are for an .060 bore block. I wouldn't recommend them for a street motor, I bought them when I was going to build a 360 race motor. I've since changed directions & am building a 340 based 416 motor.
 
Demonracer said:
I have two sets of flat top pistons for a 360, they are for an .060 bore block. I wouldn't recommend them for a street motor, I bought them when I was going to build a 360 race motor. I've since changed directions & am building a 340 based 416 motor.
Click to expand...

Need std bore anyway. Block is too good to waste money boring
 
I have these parts. They are a little grungy but cheap. PM if interested, thanks.

Oops, I may have a windage tray, i can look for that tomorrow.

20180214_161907 (600x800).jpg
 
Status
Not open for further replies.
-

Back
Top