Here's a 73 V8 Spool mount k frame slightly modified so the factory AC location on a car 5.7 Hemi will fit. I cut the spool saddle off the k frame, and flipped it over and moved it back. I used TTI headers and motor mounts, but I hacked up the drivers side TTI mount and made it into what I have now. I spaced the AC compressor out about a half inch for more clearance on the header tube. It's shown with a factory manual box, but I'm going to try a Borgeson to see if it will fit....and I feel like it will! There's plenty of ways to skin a cat....lol.