Couple questions about eq heads?

slipyoke said

Thanks every one for all the help sounds like I will be giving the guys over at hughes a call when I'm ready to pick up the heads.

Also TrailBeast I once read one of your posts about a mild to mid street cam you run? Any chance I could get the specs? I'm trying to build a mild to mid street car to daily drive as well as road trip while doing burn outs the whole way.

Click to expand...

If I had nothing better to do or spend money on I might go another step or two up on durations, but the one I have is 214/224 @.050 .512 lift with 1.6 rockers on a 110 lobe center.
It is a Magnum regrind from Oregon Cam Grinders.

It's actually mild enough that I can tune the light lope out of it with a bit more fuel, but generally run in the mid to high 14's on the A/F giving it just a little rumpety rump at low RPM's.
It's original intention was good mid throttle/rpm torque, and to retain decent gas mileage so with the OD trans I get a hair over 25mpg at 80mph.
Never paid any attention to what it gets around town because I built this motor for exactly what you want to do with yours. (sounds good around town but loves road trips)