Edelbrock Performer Carb question

well, first thing to look for is fuel getting to the carb

next time it dies, pull the gascap off and listen for a "woosh" of incoming air

after that i would pull the line of the carb, route it to a can and crank it for a while (presuming it is a mechanical pump)
then you can calculate GPH from there
if there is no/not enough fuel coming out, check the filter or other possibilities for obstructions

if there is plenty of fuel coming out of the pump then you can see what i meant in post 13, because you will have to tear that eddie apart to check float level