Need help tuning Quickfuel carb

I’ve had this carburetor apart multiple times and I’ve never seen anything out of the ordinary.
I’m running .028 idle feed restrictors, I’m running .065 idle air bleeds, I’m running .036 high speed air bleeds.
I’m running 65 main jets and 75 secondary jets, float level is hovering around the bottom of the sight glasses.
Power valve is 8.5hg with .045 pvcr’s.
Accelerator pump is a 30cc pump with .028 accelerator pump discharge nozzle with a white pump cam in the number 1 spot.
Idk see how this carburetor could be that far out of tune for a basically stock small block carbed 360 Magnum.
I get 155psi compression on all 8 cylinders, ignition is all brand new.
Timing is 18 initial and 34 total all in at 2500 and I am running vacuum advance which adds an additional 12-14 degrees of timing.
And if it isn’t ignition related why did it feel better after cleaning the dielectric grease off the plug wires and the plugs?
I bought a set of Napa beldin wires and I’m crossing my fingers it’s these Taylor wires arcing.
I’ve read multiple threads of people saying these Taylor’s suck and cause missfires big time.
Apparently the spark just comes right up through the boots and arcs to everything