[FOR SALE] 416 engine

-
Status
Not open for further replies.

QKFSH67

Well-Known Member
Joined
Dec 21, 2015
Messages
381
Reaction score
256
Location
Prophetstown, IL
Rating - 100%
7   0   0
Contact seller
complete minus carb and distributor. 12.6-1 compression. Scat 4340 crank. Scat h-beam rods. Icon pistons. Solid flat tappet cam. Edelbrock heads. Airgap intake. Heads are ported and have a race valve job. Can hear it run. Pay pal or cash for payment. $5000. Obo. I live in prophetstown, Illinois

694C967E-7CC8-4EE1-80AD-27E6E8188148.jpeg
 
I ran 11:30...5400stahl,4.56 gear, not a lot of run time, I just did it as a hobby for something to do...guessing 500-525 horse?
 
Fastback cuda...guessing it at 2900-3000.....never really changed squirters or anything but jets so I’m sure a expert could do a lot better with it...I run a 850 demon carb on it...
 
Something must be up with it to only run 11.30’s in that weight of car at almost 13 to 1 compression
I have a 10.4 compression stock stroke 360 that runs quicker than that at a good bit more weight/(3300) with less gear and convertor, and its nothing special. Eddie heads mildy ported by a local guy and small tube headers. No where near 500 horse being made there
 
Yeah I agree, not a lot of run time, 1.60 60 foot time is terrible, get that down and it will run 10.50s....
 
I will get the cam specs this evening. 118 mph with super victor, 115 mph with airgap intake. 1.60 60 ft time with super victor. 1.48 with airgap but also added jet extensions in the rear when I switched intakes, should’ve just done the extensions and tried it but I didn’t....
 
Status
Not open for further replies.
-
Back
Top