Tranny cooler lines
The pre-bent lines for the Slanty aren't too expensive. I bought a set for my orange '73 from Classic Ind. for $40. IMO it was worth it to save on the aggravation of trying to bend them myself. The previous owner had attempted to do one of them and it was touching the exhaust. I tried fixing that but then it wound up being too short, so I just bit the bullet and bought them.
Having a lift would have made the job easier because the longer one (connecting to passenger side of the radiator) was a little tricky to fish in without hitting the garage floor, but it still wasn't that bad of a job, and I don't recall removing anything extra during the process. Put it up as high as you can on jack stands and you should be good.
The pre-bent lines for the Slanty aren't too expensive. I bought a set for my orange '73 from Classic Ind. for $40. IMO it was worth it to save on the aggravation of trying to bend them myself. The previous owner had attempted to do one of them and it was touching the exhaust. I tried fixing that but then it wound up being too short, so I just bit the bullet and bought them.
Having a lift would have made the job easier because the longer one (connecting to passenger side of the radiator) was a little tricky to fish in without hitting the garage floor, but it still wasn't that bad of a job, and I don't recall removing anything extra during the process. Put it up as high as you can on jack stands and you should be good.