guys i'll chime in here , i never installed an a body windshield before. after reading a few post here me and my brother put my dad's 74 duster in today. i had cut old windshield out and cleaned good , installed new clip set for trim ( had to grind all studs for old clips and the ones that had rusted off ) drilled holes where old studs were at and screwed clips back on) painted channel with por 15 and let dry over night. installed new gasket on car first , put a bead of adcoseal b-100 butyl sealant on channel with caulk gun before i installed gasket on car. then we had a soapy mixture in spray bottle and sprayed glass around bead and slowly worked glass in gasket channel (bottom first)with plastic glass sticks i bought off ebay for window installs , it took some time but we got it in and looked sweet, after glass was in the bottom exterior of new gasket had a gasket lip you have to work back into a channel along the whole bottom before trim goes on. as for trim make sure it has no clip damage form removal and that it is laying flat looking at profile and it should snap on and look sweet. now after his for practice i can do my 70 duster.
