comp cam 306 solid

I have a 260/264 cam in a 360 that is about 10.4 to 1 compression. Got the compression up to what it is by milling my mildly ported eddies and running an 028 gasket.Bone stock 360 shortblock..
Have a 4500 flash convertor with 28 tire and 4.10 gear. Using an airgap intake. Car weighs 3300 with me.
My cam is on a 106, and is installed at 102.
I have found this combo to be pretty soft 60 foot wise(1.58 best) but makes big power MPH wise for what it is. 119+.
Soon swapping to a 904 and about 5200 flash convertor. My guess is its going to like the change a lot. Should get it in the 10’s.
In your case having that cam on a wider LSA than mine will hurt the bottom end some, but should help on shift recovery.
I think it will work with good convertor and gear. Definately one or two sizes too big, but convertor and gear can help mask it. Definately wouldnt run a single plane
The more compression the better