Anyone done Under Dash A/C ?

moparmat2000 said
Thats a very nice setup you have. I like how you fit the vents together. Really good job. Looks factory. Kinda what i'm looking for but with temp and fan control knobs built in. Did you use a universal street rod heat, a/c unit? For under your dash? I ask that because your firewall is smoothed out. I think the vintage air custom fit ones come out of the firewall. I like the hidden hose idea however on my car it will have a lowered stance and wider tires, i am afraid of rubbing, or debris flinging up and puncturing a line. A shield prob could be made up to protect the lines.

I restored my stock heater box and am looking to add a under dash unit to compliment what i have. I have been looking at different under dash cool pak type units. I am figuring since its a barracuda coupe and not a fastback, i really only need 13 BTU rating to get it cool.

As far as pulleys i am going to go look at some M bodys in my local junky. Theres about 25 of em in various years. If the pulley setups will work off em then i will likely need 2 sets of everything. I have my 67 to do, and my sons 69 notchback to do.

I’m about a 1/4-1/2 inch front the bump stops using 1.03 bars and Hotchkis TVS system up front. I’m lowered as well but only a 205 tire. That said I have plenty of room for turning and such.

I did a complete Gen IV setup. Heater and AC in one. The firewall has aluminum plates covering the factory holes. I didn’t have the factory heater box nor any of the under hood parts. I decided the new technology would be better than trying to locate circa 67 stuff. This system is all electronic with no pull wires for the controller, and works really well. Good luck in your endeavors installing the ac when you find the one you want.
Cheers.