Father-Son 1974 Duster Project
I am still waiting for adhesive to dry on one trouble spot of my stainless trim, so I took care of some stuff I’ve been putting off. Found out the horns go under the battery. All installed now and sounding good! Bad pic but they are under there.
My HEI module is hidden under my coil braket. Originally wanted to put it inside a hollowed out ignition box, but I opted to have it closer to the distributor. I decided to put the ignition box and ballast resistor back into the car just because. I made a fake little wiring harness that connects the resistor to the ignition box, but goes nowhere else and it has no live circuits in it, but the components are there none the less.
Still have not gotten caps for the AC lines but managed to get the inner fender braces bolted in along with the vacuum reservoir. Still need to run the washer lines but go the tank in and pump wired up.
Also got the factory style spark plug wire looms on the valve covers and measured up some brackets for an aluminum radiator overflow tank I found.
View attachment 1715172891
View attachment 1715172891
View attachment 1715172892
I am still waiting for adhesive to dry on one trouble spot of my stainless trim, so I took care of some stuff I’ve been putting off. Found out the horns go under the battery. All installed now and sounding good! Bad pic but they are under there.
My HEI module is hidden under my coil braket. Originally wanted to put it inside a hollowed out ignition box, but I opted to have it closer to the distributor. I decided to put the ignition box and ballast resistor back into the car just because. I made a fake little wiring harness that connects the resistor to the ignition box, but goes nowhere else and it has no live circuits in it, but the components are there none the less.
Still have not gotten caps for the AC lines but managed to get the inner fender braces bolted in along with the vacuum reservoir. Still need to run the washer lines but go the tank in and pump wired up.
Also got the factory style spark plug wire looms on the valve covers and measured up some brackets for an aluminum radiator overflow tank I found.
View attachment 1715172891
View attachment 1715172891
View attachment 1715172892