OIL MODS

Hi All,

I'm looking for advice to make my small block stroker last with the odd blast to 7500rpm over the 1/4 mile.

I've looked through the post from Guitar Jones. Is there anymore to be added?

Did 3 runs last year and ended up doing in number 8 bearing crossing the line just over 7000rpm

I had a precision high flow blue printed pump and full groove mains.
All drain backs were enlarged

Something must have been wrong with that bearing or Rod bolt or the big end of the rod because number 8 never goes away

It has its own oil flow from the back of the motor going through that last main cap.

It is not being fed like the other main caps feeding the rods. Because it is being fed more or less directly from the pump. Where the others are all being fed off of the passenger side oil galley.