Ammeter to Voltmeter...who does it?
Heres the schematic. Solder the capacitor to the 960 as shown on the NTE 960 package. The schematic is representative, always wire up to the pin outs shown on the packaging for the chip. Negative leg of the capacitor goes to the negative ground leg of the chip. It will have to be soldered in that way. Schematic says capacitor to use needs to have a value between 5 and 100 microfarads, and be rated for 15v. Or more. This is a very simple circuit i have drawn up. Follow the wire tracings on the pic
Heres the schematic. Solder the capacitor to the 960 as shown on the NTE 960 package. The schematic is representative, always wire up to the pin outs shown on the packaging for the chip. Negative leg of the capacitor goes to the negative ground leg of the chip. It will have to be soldered in that way. Schematic says capacitor to use needs to have a value between 5 and 100 microfarads, and be rated for 15v. Or more. This is a very simple circuit i have drawn up. Follow the wire tracings on the pic