318 timing

10 is a good starting place as long as the engine is in decent condition, you are taking the vacuum line off the distributor when setting it?
Eddy carbs have issues with hot starts from under-hood heat, but you could also have a starter itself issue, how close is the exhaust running by the starter.
10 is a good starting place as long as the engine is in decent condition, you are taking the vacuum line off the distributor when setting it?
Eddy carbs have issues with hot starts from under-hood heat, but you could also have a starter itself issue, how close is the exhaust running by the starter.
yea I unplug the vacuum advance motors stock 82k original timming mark don'
Jump around exhaust is not close this problem started when I put the intake n carb on if it sits for 10 min it fires right up half hour I have to floor it to start it