904 Transmission Stopped Going Into Gear
Yep, I'm definitely not giving a shop that kind of money when I can take a stab at the rebuild in my garage (with some FABO help of course). Thats half the fun of this anyways, learning how to do stuff.
On that note, I started disconnecting my 904 in prep for removal.
When I started loosening the front cooler line it felt really tight. When I finally got it off this is what I found:
![20180521_075704[1].jpg](https://www.forabodiesonly.com/mopar/attachments/20180521_075704-1-jpg.1715178248/ "20180521_075704[1].jpg")
The line had been completely twisted shut when the previous owner tried to install/tighten it. It was hanging on by a sliver that broke when I loosened it.
So the trans was getting very little or no flow to the radiator. That might explain it chewing up bands.
Anyone know who makes a good 904 cooler hardline set?
Yep, I'm definitely not giving a shop that kind of money when I can take a stab at the rebuild in my garage (with some FABO help of course). Thats half the fun of this anyways, learning how to do stuff.
On that note, I started disconnecting my 904 in prep for removal.
When I started loosening the front cooler line it felt really tight. When I finally got it off this is what I found:
The line had been completely twisted shut when the previous owner tried to install/tighten it. It was hanging on by a sliver that broke when I loosened it.
So the trans was getting very little or no flow to the radiator. That might explain it chewing up bands.
Anyone know who makes a good 904 cooler hardline set?