Demon street carb install

You will have to fabricate and modify the original bracket. The geometry is all wrong. The cable is clamped and situated too low, it should be up higher, in line with where it connects to the carb. The kickdown rod is way out of whack too. It can be made to work but you have to fabricate, mod, improvise. I did this on my son's 78 Magnum w/360 and oem intake, and 2-bbl brackets.Getting the cable in line at the correct angle is not too complicated, I'd go with a Lokar kickdown cable kit, vs trying to make the rod etc work.