1974 duster seat belt interlock module removal

i,m wanting to remove entire module, but if i cut the wires i have been reseaching, the dome light dont work, key in ignition will not buzz to remind you to take key out, door ajar will not buzz , and i wnt to make sure d4 i start hacking on my wiring harness, so that means if the module is bad or goes bad that i will have to remove all the wiring if i leave the module in, ma mopar saw what a cluster f*** they made when they added these in 1974b and 1975, and by 1976 they sent out the order to quit using them, i checked 2 other wiring harness i have, a 1971 dart and a 1976 duster, niether one of these have the modules. If you can find a orange one from canada or a green one, they done the by pass inside and you dont have to do the bypass on the fender well. Problem is finding one the right color that is good and not corroded , thanks for your help, like i was saying i have 2 of the tan modules and both are full of white corrosion where water got to the soldier joints and i dont want to rewire this again ,want to get it right the 1st time