MuuMuu101's 68 Dart, A Learning Process...

Did you check the timing?

How do you check timing if the engine won't run? I need to borrow or buy a timing gun.

If the distributor is loose timing will jump around. Try and turn cap with hand see if it moves. Does the carburetor spray fuel when you actuate the throttle blade? These things can be tried without even running engine. The timing chain can also jump time but it’s probably not the case here. The engine really only needs three things to run, air, spark, and fuel. Check these areas.

I'll check the distributor when I have free time.

If the choke is closed, open it and place a screw driver or something to keep it open. Now try and start it and see if it will idle.

I was going to do that as well. I may have a skinny long rod lying around at work.

SOUNDED LIKE IT WAS FLOODING TO ME! AND A BAD STARTER , NOT ENGAGING PROPERLY !

I had the starter tested at Autozone and the solenoid was actuating. We ran the test 4 times. Otherwise, I was going to buy another one.

Thanks for the advice everyone.