Success - Removal Instalation a833 tailhousing bushing
Just an FYI on removal and installation of the bushing... I didn’t find much on fabo except while the trans was installed.
I rented (free) a seal press kit from O’Reilly and they had the nearly perfect diameter attachment for removing and installing the tailshaft bushing. I used the one that was 1.750” to remove it.
I first gave it a wack or two with a 4 lb. hammer just to free it, then drove it the rest of the way into the tailhousing with my 12 ton press.
Installing was about the same, though I used a larger diameter for tapping the new bushing in straight just to get it started. I flipped it over so that the cone wasn’t forcing the bushing open, but the larger, flat side down against the bushing.
Just an FYI on removal and installation of the bushing... I didn’t find much on fabo except while the trans was installed.
I rented (free) a seal press kit from O’Reilly and they had the nearly perfect diameter attachment for removing and installing the tailshaft bushing. I used the one that was 1.750” to remove it.
I first gave it a wack or two with a 4 lb. hammer just to free it, then drove it the rest of the way into the tailhousing with my 12 ton press.
Installing was about the same, though I used a larger diameter for tapping the new bushing in straight just to get it started. I flipped it over so that the cone wasn’t forcing the bushing open, but the larger, flat side down against the bushing.