New 408 for the Flyfish
Good news, found where the piece of cast iron came from...it was from one of the oil pan bolt holes. I double checked that everything was clean and secure, bolted the pan back on with a dab of permatex on that bolt AND got the engine in the car Saturday. It was stupid hot outside (heat index was over 100), so I quit after getting it in the car. Still need to hook up the trans, install intake, and all the other little stuff.....Almost there!
![IMG_2506[1].JPG](https://www.forabodiesonly.com/mopar/attachments/img_2506-1-jpg.1715193708/ "IMG_2506[1].JPG")
Good news, found where the piece of cast iron came from...it was from one of the oil pan bolt holes. I double checked that everything was clean and secure, bolted the pan back on with a dab of permatex on that bolt AND got the engine in the car Saturday. It was stupid hot outside (heat index was over 100), so I quit after getting it in the car. Still need to hook up the trans, install intake, and all the other little stuff.....Almost there!