T-56 Transmission Install Thread

Well I guess it's my turn to address my clutch issues. Using a Viper slave with 1/2" spacer, Wilwood master, ACT clutch and PP, McLeon flywheel. Car has no issues going into gear when it's off. I can push the clutch pedal down and start it. But I can't switch gears with the car running. Pushing the clutch down doesn't release. I'm thinking the slave isn't pushing the pressure plate enough to release the clutch.

I'm thinking I'm going to see about bleeding everything again, then check to see if the firewall is flexing. Finally I'll have to drop the trans again and inspect everything.

@72BBSwinger @Map63Vette

Help me out, I want to drive this car!

Riddler