1972 Duster Build with my Daughter
Add a little oil for lube
Install the new o-ring in the upper pump plate and make sure you align the pin to the cutout in the plate! It can be reassembled with this not aligned!
Add the spring and install the new o-ring in the housing for the pressure cap to seal to.
Simple clamp will compress the plate so you can get the snap ring back on.
Install the valve with the spring
Install the new o-ring in the plug and press it in
Get the snap ring started (warning that snap ring can FLY to all parts of the garage so be careful) and use a socket to pop it down until it seats in its groove.
Put a little grease on the square ring to hold it in and install. Install the o-ring on the casting to seal against the tank
The tank should go on by hand, make sure you get the hole in the back aligned with the above square o-ring and she is ready for cleaning and painting!
Add a little oil for lube
Install the new o-ring in the upper pump plate and make sure you align the pin to the cutout in the plate! It can be reassembled with this not aligned!
Add the spring and install the new o-ring in the housing for the pressure cap to seal to.
Simple clamp will compress the plate so you can get the snap ring back on.
Install the valve with the spring
Install the new o-ring in the plug and press it in
Get the snap ring started (warning that snap ring can FLY to all parts of the garage so be careful) and use a socket to pop it down until it seats in its groove.
Put a little grease on the square ring to hold it in and install. Install the o-ring on the casting to seal against the tank
The tank should go on by hand, make sure you get the hole in the back aligned with the above square o-ring and she is ready for cleaning and painting!