392 in a 70 Duster
I have a plan for the transmission mount, basically copying what @Dragger40 did. Going to weld in a couple inches of the DOM tube in the torsion bar crossmember. That will hold the bushings and add stiffness after the center section was hacked out. Still planning to build a floor support over top of the trans.
I have a plan for the transmission mount, basically copying what @Dragger40 did. Going to weld in a couple inches of the DOM tube in the torsion bar crossmember. That will hold the bushings and add stiffness after the center section was hacked out. Still planning to build a floor support over top of the trans.